How can the bulkhead STOP Envelope be installed?

1. Mounting LIGHT: positioning the bulkhead between the two shoulders of the opening to be protected. The bulkhead in this case has the same width as the door compartment. The wall mount posts are 50 mm thick.
2. Mounting OFF LIGHT: positioning of the barrier outside of the compartment slats to be protected. The bulkhead in this case is wider than the compartment to be protected because the two uprights will be fixed externally to the shoulder strap.

PARALLEL MOUNTING ANTI-LAYING: 5 MINUTES, EXTREME EASY

The design of new anti-flooding bulkheads comes from the experience gained in the installation of traditional bulkheads for which we have found tightness and security limits.

The new bulkhead has a grip pulling system that guarantees a high degree of reliability beyond traditional bulkheads.

We ship the prepaid parcel kit to all over Europe via courier .. you will be able to secure two uprights on the sides of the opening by stretching a little silicone and practicing 4 holes in the wall with a normal drill and screw the uprights with the supplied screws. nothing more

This simple installation will allow you wherever you like, to mount the bulkhead simply by approaching the guides and by rotating the simple knobs ... automatically the gaskets will come to life protecting your home or shop from the ever-increasing water bombs.

Flood damage bullets are not only the most reliable we have ever designed but also cost about 20% less on average than the traditional!

If you want to install our bulkhead stand alone we ship all over Europe

How to install PARAMETER ANALYZING NOT autonomously in areas not reach by our operator?

For areas NOT accessed by our operator and for any installation NOT independently contact the telephone number of ASSISTANCE to have all the information to whom to contact for mounting the Anti-flooding STOP ALLAGAMENTI.

Our watertight bulkhead installs in minutes.

Anti-flooding Various solutions to solve any situation.

RESOLVE Outbound Shoulder and Troubling Problems not perfectly flat.

Our bulkheads have been designed to protect doorways, garage doors, large doors, and any flooded premises.
Even a possible out of the wall side wall shades we can solve. With the new system, the anti-flood mobile barrier can is be positioned even out of the lead.
We are at your disposal for further information by contacting the STOP Enforcement Support number.
The standard measure of a bullet to defend itself from a flood is of cm 40, but we are; You can increase the height by adding slats to reach the required height.
STOP floods is a robust and manageable bulkhead made up of modular aluminum slats.
The mechanisms placed on the top ensure a vertical push down by pressing the gasket.
If the bottom of your door is not is perfectly flat no problem! We also solve this case!
The STOP Allagamenti system allows to secure a closure to the lower surface if the track has leaks or gaps, inaccuracies, etc.